Beach Adirondack Chair Drink, Sand ice for 40oz or 20/30oz Quencher Tumbler lid H2.0; 3D Topper ONLY Lid NOT included; Hot NEW Beach fav
from $21.99
MADE TO ORDER - Up to a 3 week creation time, then ship time.
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE
Size to Fit Quencher H2.0:
Quantity:
MADE TO ORDER - Up to a 3 week creation time, then ship time.
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE
MADE TO ORDER - Up to a 3 week creation time, then ship time.
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE
Please check out more products on my website www.candodesigns.net
drink color and placement of shells/cup may vary!!!!
Tumbler Topper fits 40oz or 20/30oz tumbler lids for H2.0 Quenchers (LID NOT INCLUDED). Topper is made to order, placement of accents will vary. There is an opening for a straw. This topper fits directly on a 40oz or 30/20oz Tumbler.
This topper has been tried on the popular Stanley 40oz 20oz and 30oz H2.0 Quencher Lid as well as several dupes (20/30oz are the same size lids). If you have any questions about sizing you must ask BEFORE purchase. Want a different size?? Just ask and I'll see what I can do!!!
KEEP OUT of EXTREME Hot or Cold for periods of time (some items are printed on a 3d printer, which is essentially plastic and could melt in exposed heat for a period of time).
These can take up to 2-3 weeks to make. These are custom/personalized/made to order products and no refund will be made.
HAND WASH ONLY! LET DRY COMPLETELY TO GET WATER OUT OF ANY CREVISIS!
Made from resin, clay, glue, plastic, possibly other items. Not for ingesting and keep away from small children.
They are not overly fragile, however if you drop it, it could break, just like any plastic, resin or clay items.
Monitor colors may reflect slightly different colors than in real life. Please ask any questions prior to buying.
Please visit my other listings and thank you for stopping by. www.candodesigns.netDo not put in mouth or ingest. There are small parts involved so keep away from children. NOT EDIBLE